Zetor Proxima CL 80, Руководство оператора

Страница: 107 / 210

Activation of the rear PTO shaft - dependent revolutions - stationary working mode
PGPPN175
Number and sense of revolutions depends on the shifted gear and position of the reversing lever. The
reduction lever must be in the neutral position.
When the tractor is not going with its engine running:
The operator must not sit on the driver's seat.
A - When the clutch pedal is pressed, move the gear shift lever of dependent and independent revolutions to
the lower position (b) to shift dependent revolutions of the rear PTO shaft.
B - When the clutch pedal is pressed, use the gear shift lever to select suitable speed of the rear PTO shaft.
C - When the clutch pedal is pushed down, use the main gear shift to shift a gear and the reversion level to
select the driving direction. When the clutch pedal is released, the rear PTO shaft starts to rotate.
If the operator, when working with the rear PTO shaft in the stationary working mode, sits on
the driver's seat, the working mode automatically changes to the common mode.
If the tractor for any reason moves or the hand brake is released when working with the rear
PTO shaft in the stationary working mode, an uninterrupted audio signal will be generated and the
engine will be shut down.
PTO DRIVE OF AGRICULTURAL MACHINES
106