Zetor HORTUS CL Series Скачать руководство пользователя

Страница: 54 / 142

Foot Operated Accelerator

Parking Brake

Important:

Traveling with the park brake on will damage the brakes.

Parking Brake Lever

Note:

The brake discs can be worn prematurely if driving the vehicle with the parking brake engaged

partially.

This pedal can override a fixed hand throttle setting.

- Acceleration Pedal

HODP058

1. Pull the Lever fully up to engage the park brake.
2. Press the button on the end of the lever and lower

the lever to release the brake.

- Parking brake Lever

HODP059

1. With the left and right brake pedals interlocked,

depress the brake pedal with a right foor firmly and

pull up the parking brake lever to lock the pedals.

2. To release the parking brake, depress the brake

pedal firmly.

- Parking brake lever

HODP060

DESCRIPTION OF TRACTOR CONTROLS

Содержание HORTUS CL Series















































































































































Результаты поиска

Содержание HORTUS CL Series

Отзывы:

Похожие инструкции для HORTUS CL Series

Бренды по названию

Популярные бренды

Zetor HORTUS CL Series, Руководство оператора

Результаты поиска

Содержание HORTUS CL Series

Отзывы:

Похожие инструкции для HORTUS CL Series

Бренды по названию

Популярные бренды