Zetor HORTUS CL Series, Руководство оператора

Страница: 56 / 142

Shuttle Shift Lever - HS Model
Note: The vehicle can start off by operating the shuttle shift lever regardless of the position of the clutch
pedal. Therefore, care should be taken.
Warning:

Do not operate the shuttle shift lever during driving. You can get injured by impact due to
inertia. Change the driving direction after stopping the vehicle.

Operate the shuttle shift lever only when seated in the driver's seat.
Note: The response speed can vary as follows according to the operating speed or operating environment
(temperature) of the hydraulic clutch:

Low operating oil temperature (in cold weather or initial tractor operation): The response may
become faster (abrupt starting). Therefore, operate the clutch at a low speed, and operate the
shuttle shift lever after warming up the engine sufficiently.

High operating oil temperature (after prolonged use of the machine): The response may
become slower, but this is normal.
Gear Shift Lever
This lever can be shifted by using the clutch, both when the tractor is stationary or mobile.
It is located on the R.H.S of the driver seat.
This lever is to switch between forward driving and
reverse driving. Set it in the position N unless driving.

Forward driving - Pull up the lever and push it
forward to drive forwards.

Reverse driving - Pull up the lever and pull it
backward to drive backwards. Then, the reverse
driving buzzer sounds.
1 - Shuttle Shift Lever
HODP062
1. Seat Belts
2. Gear Shift Lever
3. Seat Adjustment Knob
4. Seat Adjustment Lever
5. Reduced and Road Gears Shift Lever
HODP063
DESCRIPTION OF TRACTOR CONTROLS
55