Zetor Forterra CL 100, Руководство оператора

Страница: 106 / 198

Dependent and independent rear PTO shaft revolutions
FH13N007
The system used in a tractor is marked on the label placed by the rear PTO shaft revolutions preselection
lever.
This system has only 540 or 1000 rear PTO shaft revolutions.
With engaged dependent (A) or independent (B) rear PTO shaft revolutions (B), the switch of rear PTO shaft
revolutions preselection on the right column of the cab can be used to engage 540E or 1000E of rear PTO
shaft revolutions.
The lever is placed on the right side of driver's seat. For shifting the lever, it is necessary to lift collar in the
direction of the arrow (C).
Facilitating connection of joint shaft of an aggregated machine to the tractor
F15N039
For facilitating the connection of joint shaft of aggregated machine to a tractor a button (1) placed on
mudguards can be used.
With the engine running and rear PTO shaft switch off, spinning of rear PTO shaft occurs after pressing the
button (1). PTO shaft stops spinning after releasing the button.
Beware:
Rear PTO shaft revolutions preselection lever must not be in (N) position or in the position of
a dependent revolution of rear PTO shaft.
When manipulating with PTO shaft by means of buttons (1), the operator must stand beyond
the space of the connected tools not to be caught or injured.
A
- PTO shaft dependent revolutions engaged
N
- Neutral position (rear PTO shaft end-point can be spun freely)
B
- Independent PTO shaft revolutions engaged
DRIVE OF FARMING MACHINES
105