Zetor Forterra CL 100, Руководство оператора, Страница: 36 / 198

Tilting and protrusion of steering wheel
Manual throttle
Pedals and levers
Gear shifting lever
Tilting column of steering wheel enables variable setting of
position of the steering wheel both in terms of angle and
height.
Height setting of steering wheel
The setting is done by protrusion or retracting the steering
wheel after unlocking arrestment by turning a lever (1) in
the direction of an arrow. After setting the steering wheel,
lock the lever (1) by tightening in the direction of an arrow.
Angle setting of steering wheel
Setting is done by tilting the steering wheel after unlocking
the lock by turning the lever (2) in the direction of the
arrow. After setting the steering wheel, secure the lever
(2) by retightening against the direction of the arrow.
F205
a - idle run
b - maximum supply
The lever enables to set engine revolutions in the whole
range (a) to (b).
C15N054
1 - travel clutch pedal
2 - foot brake pedals joint by a catch
3 - throttle pedal
F13BN008
The tractors are equipped with a four-speed synchronized
gearbox, three-stage torque multipliers and two-speed
reduction.
The four-speed gearbox is controlled with the main shifting
lever with control buttons of the torque multiplier (1).
The gearbox does not make it possible to use
the fourth speed for the reverse motion.
F15N036
ACQUAINTANCE WITH TRACTOR
35