SSG-0101 ZetaAlarm Systems
5
Mounting the Series SSG
When you have a suitable location for the Series SSG power supply source, follow the instructions
indicated below:
1. Hold the rear box in the right position, supported on the wall, and mark the position of the screw holes,
making sure that the center one is leveled.
The following illustration shows the box and the screw holes through the back.
Do not use the rear box as a guide when drilling the holes!
2.
Drill the holes in the wall.
3.
Prepare the necessary openings to feed through the cable.
4.
Screw the equipment’s rear box to wall using the holes in the box and the proper screws.
