SSG-0101 ZetaAlarm Systems
3
1. INSTALLATION OF SERIES SSG
POWER SUPPLY SOURCES
It is easy to install and start operating the Series SSG
power supply source if you follow the procedures
described in this manual.
Read the instructions in this manual carefully to
prevent anomalies in the power supply source.
Checking the power supply source.
Before installing the Series SSG power supply source,
you should make some checks.
The following procedure indicates what should be
done in the event that the equipment has been
damaged after leaving the factory, or if the user has
any doubts about the quality of any ordered element.
1. If, after unpacking the Series SSG power supply
source and making a visual inspection, you find that it
has been damaged in any way, YOU SHOULD NOT
carry on with installation, but rather you should contact
the supplier for instructions on how to return and
replace the product.
Likewise, if during installation the product does not
respond properly, immediately contact your supplier.
2. It is important that you note the relevant details in
your complaint, the date on which you received the
product, the conditions of the package, and the name
of the contact person of the supplier firm.
. When the product has to be returned to the supplier,
it is recommended that the original packaging be used
whenever possible.
WARNING!!!
TAKE THE NECESSARY PRECAUTIONS WHEN HANDLING EQUIPMENT SENSITIVE TO ELECTRICAL
DISCHARGES
