PREMIER POWER PACK INSTRUCTION MANUAL
GLT.MAN-138
PAGE 15
Issue: 1.13 27/7/2012 N.R.P.J.
MAINTENANCE INFORMATION
The following maintenance should be carried out at least once per annum:
a)
Check that the output voltage of both outputs is within the range specified in the Technical Information
section;
b)
Check the charger voltage using the instructions in this manual;
c)
Check the battery condition. Look for signs of leakage or corrosion. Make sure that the battery leads
are securely attached to the battery terminals;
d)
Check for damage to the insulation of all electrical cables;
e)
Check that a fault is reported when the AC mains are switched off;
f)
Check that a fault is reported when one of the battery leads is disconnected.
MANUFACTURER'S DECLARATION
I hereby declare that the design of the 5A Premier Powerpack PSE has been carried out in accordance with a
quality management system which incorporates a set of rules for the design of all elements of the PSE;
and the components of the 5A Premier Powerpack PSE have been selected for the intended purpose and are
expected to operate within their specification when the environmental conditions outside the cabinet of the PSE
conform to class 3K5 of EN 60721-3-3:1995.
Geoff Walker
Approvals Manager
GLT Exports Limited
1
st
July 2011
0359
Zeta Alarm Systems by GLT Exports Ltd,
72-78 Morfa Road, Swansea SA1 2EN
12
0359-CPD-0146
EN54-4:1997+A1:2002 + A2: 2006
Power supply equipment for fire detection and fire
alarm systems for buildings
Premier PowerPack
PP2/12, PP5/17
Other Technical Data: See Doc: “Simplicity Plus Product file”
held by the manufacturer
