ZEROXCLUB Instructions Manual
5
The wiring method when product use, as follows:
(1) Connect the
Yellow
wire to positive power( 12-24V)
NOTE:
The
Yellow
wire needs to be powered for a long time. If the
Yellow
wire has no power, the system will lose all the settings you made on the screen.
We recommend that you connect the
Yellow
wire to the (+) positive terminal of
the car's battery so that the system can save the settings and you will not have
to reset them the next time the system is enabled.
(2)
Connect the
Red
wire to ACC
The
Red
wire is connected to the car ignition wire ACC switch
(which is the gear switch before starting up the car's motor),
when the car key is turned on, the device will start automatically,
and if the vehicle key is turned off, it will automatically turn off.
(3)
Connect
Black
wire to negative power/ Ground / Sheet Metal
(4)
Connect
Green
wire(CH2 trigger) to reversing light.
NOTE:
This
Green
wire is used to trigger CH2 to display the reverse
guideline. If the system as a continuous observation use, please ignore this
wire and connect the camera to CH1/CH3/CH4. If as a reverse viewing with
parking guideline only, please connect this wire to the reverse trigger ACC
