ZEROXCLUB Instructions Manual
7
The camera comes equipped with an adjustable flat mount
base. You can adjust the lock-screws on the sides of the
camera to adjust the lens of camera with a small Phillips
screwdriver. A short 4 -pin aviation video cable is attached to
the body of the camera.
Mark camera mounting position.
Screw on according to the mark.
Tighten the screws on both sides
of the camera. Adjust the
camera angle as needed.
2.4.2 Side Camera
The camera base detaches by removing the four housing
screws using a miniature Phillips screwdriver. The base can
then be screwed or bolted onto in the desired location. A short
4-pin aviation camera is attached to the camera. And you also
can adjust the lens during this step.
Remove the screws
of the camera
Open the housing of
the camera to reveal
the dome camera and
the base. Fix the base
in the car where it
needs to be mounted
Rotate the dome
camera to get the
angle and image you
want, then put the
housing in place and
tighten the screws.
