ZEROXCLUB Instructions Manual
10
1) Before connecting, you need to confirm that the voltage of the
battery is between 12-24V.
2)Rear cameras are usually powered by the reverse lights.
This makes them more convenient to use as the monitor and the
camera will automatically turn on when you shift the gear into
reverse.
2.6 Testing the System
If you are using a car charger, simply start the ignition and the
camera will be activated. If you are using a DC Power Pigtails
Cable, you will also need to change to reverse gear and your
backup camera image should come on.
NOTE:
If there are any issues, then do not panic. Slowly check
every single connection, and make sure that everything is correct.
Make sure that the red/positive ends of a cable connect to
red/positive on other cables, and that black/negative connects to
black/negative as well. Also, check the power sources to make sure
that they are correctly connected, and that no fuse has blown.
Conclusion
If you strictly follow this backup camera installation guide and all
goes well, then your backup camera system should be correctly
installed and fully functional.
