Zero B EMERALD RO, Руководство пользователя

Страница: 9 / 24

6
Start the water line and switch on the power and check the following functions:
a) Power ON - Red indicator will turn on a) Power ON - Red indicator will turn on
b) Purification ON - Blue indicator will turn on b) Purification ON - Blue indicator will turn on
c) Tank Full - White indicator will turn on c) Tank Full - White indicator will turn on
d) Purified water will start filling the tank d) Purified water will start filling the tank
e) To check for tank-full: The tank gets automatically filled with the purified water. When the
tank is full, 'Tank Full' indicator will turn ON and 'Purifier On' blue indicator will turn OFF
f) It is recommended to drain complete tank water for the first time & then clean the tank & refill again. It’s
natural to get blackish water for initial 1.5 ltr
SAPPHIRE
EMERALD
Location of the Unit:
• Ensure that the reject point is not too far from the customer drain
• Please do not terminate directly into the drainage (keep it hanging over the drainage)
• Install the unit away from any direct source of heat, sunlight or splashing water
Important Instructions
Your Zero B RO purifier will be installed free of cost by our 'Water Care Service Engineer'.
(Only basic installation material has been provided with the product. Additional material required will be
charged at actual)