Zepter Z-ATC, Инструкция по эксплуатации

Страница: 4 / 5

6 7
Clean the Zepter Analog Thermocontrol with a dry or wet soft cloth after each use;
if needed, you can also wash it in the dishwasher, or wash it under running water.
MAINTENANCE
Model: Z-ATC Zepter Analog Thermocontrol
Dimension: 60 mm diameter, 30 mm height
Weight: about 70 g
Temperature range: + 20°C - + 85°C (operating)
Humidity: 10-90% u.r.
TECHNICAL DATA Z-ATC
• The device is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities and/or lack of experience and skills.
• The device is not a toy: do not allow children to play with it.
• Do not leave the device unattended during use.
• Do not use the device if it is damaged or, in general, in case of faults, defects or
suspected defects after a fall or overheating.
• Do not expose the device directly to temperatures exceeding 100° C.
• Do not put the device in the oven or in the microwave.
• Make sure that the device is screwed tightly onto the lid before use.
• Use the Z device only with the lids from the Zepter Z Masterpiece CookART Line.
• Repairs must be performed exclusively by a Zepter Service Centre. Unauthorized
repairs could cause injury or damage to the appliance.
The manufacturer cannot be held responsible for unauthorized work.
• The device must only be used following the instructions described in this manual.
Any other use is considered improper.
• The manufacturer declines any responsibility for damage caused by improper use
of the device.
EN EN
INSTRUCTIONS FOR USE