Zepro ZN 2500-130, Инструкция по установке

Страница: 22 / 68

ZN 2500-130/150
22
Installation
www.zepro.com
4.2 Support frame, trailer
NOTE!
In cases where assembly jigs cannot be used due to,
for example, locking devices, go directly to step 3.
1. Measure and mark the midpoint of the rear beam
of the trailer. See illustration.
2. Bolt or spot-weld the mounting jig (product no.
78183TL) to the rear beam so that both mid-points
match. See Image 25.
3. Position the support frame under the trailer chassis.
4. Temporarily connect the control card to enable the
lift functions, see section "3.8 Temporary connec-
tion" on page 16.
5. Raise the lift arms to their highest position.
6. Attach the 1st booms to the lugs on the jig. Use
position A if the platform is equipped with mud-
guard, otherwise position B. See Image 26. Use
the steel platform’s normal pivots. In cases where
assembly jigs cannot be used, measure the cor-
responding distance between the 1st boom and
the bed, see Image 26.
Image 25. Measure and mark the midpoint of
the rear beam of the trailer
Image 26. Mounting options
56
80
41
A
B
Image 27. Bolt or spot-weld the
mounting jig to the rear beam