Zepro ZHD 3000-150, Инструкция по установке

Страница: 4 / 37

4
Since 1/1/1995 ZEPRO tail lifts sold to the European
market are stamped with a CE mark. This is the
manufacturer's guarantee that the product conforms
to the European Machinery Directive.
The application of the European Machinery Directive
is intended to harmonise product safety levels across
Europe.
There are some general principals that should be
made clear when performing the installation of
ZEPRO lifts.
Follow the installation instructions. If it is not
possible to follow the installation instructions or
if modifications are required, the modifications
must be approved by the manufacturer. This is a
consequence of the CE marking regulations as it
cannot be possible for a manufacturer to certify
conformity to the Machinery Directive if the product
is subsequently changed without his knowledge or
approval. In order for the product's CE marking to
remain applicable the forms supplied by ZEPRO
must be completed in case of modification.
Welding is not allowed unless specifically
recommended by the manufacturer.
In order to increase security, additional decals, which
are diagrammatic and easily understood independent
of language will be sent with the lifts.
Ensure that these decals are affixed so that the
information contained on them is available for all
users of the lift.
Position the control unit to ensure that the operator
has a good view of the load, the working area and
the loading area, whilst maintaining a safe
distance from the risk zone between the platform and
the body. Follow the operator’s instructions for use of
the control unit and its functions.
1. CE marking