Zepro ZHD 3000-150, Инструкция по установке

Страница: 37 / 37

37
13. Dismantling
10. Check that the battery is disconnected. Unscrew
the cable from the battery to the tail lift and all the
cables and wires between the hydraulic unit and the
control unit. Lower the support frame and remove it
from the truck chassis.
1. In the event of dismantling the tail lift from the
vehicle, in the case of transferring it to another
vehicle, for storage or for modification please follow
these instructions.
2. Support the platform by a crane or similar
equipment that can safely carry the platform’s
weight. (NB. weight info).
3. Dismantle the tilt cylinders upper axle in the
platform and rest the cylinders on the ground.
4. Run the tilt cylinders to their minimum stroke limit
to remove pressure from the circuit.
5. Dismantle the tilt cylinder’s lower axle at the
support frame. Remove the cylinder and take away
the hoses. NB. Oil can leak from the hoses and
cylinder.
6. Dismantle the platform’s axles.
Lift away the platform, lower the liftarm to the ground.
7. Unscrew the lift cylinder’s upper axle at the lift
arm and lower the cylinders to the ground. Take the
lift cylinder’s lower axle away at the support frame
and remove the cylinders completely. Loosen the
connected hoses.
8. Unscrew the lift arm’s axles at the support frame
and take away the lift arm.
9. Support the support frame from its underside with
a forklift or similar equipment with sufficient loading
capacity. Unscrew all bolts from the mounting
brackets.