40
b. Very carefully bend Tabs A & K up to 90 degrees. A clear slot should open up where you cut
the slits. If necessary, use the tip of your knife to clean out and open up the slots (38,39).
38
39
14. Form up the the rear of the box:
a. Apply glue to the mating faces of tabs D, E, F & G, at the back corners of the box (40).
b. Form the back-left corner. Burnish the connection thoroughly with your fingers or the butter
knife. If necessary, hold the corner together with a binder clip while the glue sets (41, 42).
c. Repeat for the back-right corner (43).
40
41
42
43
