14
b. Next do the 220 ohm resistors (R1,R2,R3,R13). These resistors are labeled RED, RED,
BLACK, BLACK, BROWN. Bend the leads on the back so they won’t fall out.
11
12
c. Lastly, install the 10K resistor (R12), labeled BROWN, BLACK, BLACK, RED, BROWN. Bend
the leads.
13
14
d. You should have a whole forest of bent leads coming out the solder side of the board (15).
Now you can turn the board solder-side-up and solder each lead to the board. Use a clamp
or vise if you have one; it makes soldering much easier (16). Clip off the leads (17).
15
16
Now clip each lead with your flush cutters at the solder joint (9).
17
18
