Zephyr AK9440AS, Инструкция по использованию, уходу и установке

Страница: 17 / 24

=
LED Lights On/Dim/Off
LCD Screen (speed level, delay off, filter clean,clean air)
Adjust 6 Speed Levels
Power / Delay Off
Power / Delay Off Button
Power Button Function
- Button will turn power on and off for entire insert (fan and lights).
- The insert controls will remember the last speed and light level it was turned off at.
(Example: Press Button to turn off insert when on fan Speed 4 and high lights. Press Button again and the
insert will turn back on at Speed 4 and high lights level.)
Delay Off Button Function
- Press and hold Button for two-three seconds and the fan will turn on Speed 1. The Graphic will illuminate. After five
minutes the fan and lights will automatically turn off.
- Pressing Button while Delay Off Function is enabled will turn the insert off and cancel the Delay Off Function.
Speed Selection Buttons
Fan Speed Decrease Button
- Press this button to decrease fan speed. 6 (burst), 5, 4, 3, 2, 1.
- If fan is on Speed 1 and this button is pressed, fan will power off.
Fan Speed Increase Button
- Press this button to increase fan speed. Fan On, 1, 2, 3, 4, 5, 6 (burst).
- If hood is off and this button is pressed, fan will turn on Speed 1.
Burst Mode
- This speed level is intended to be used as a quick burst of air extraction when excess cooking fumes and smoke are
generated. After 3 minutes the fan will automatically change to Speed 5.
Lights Button
- The Zephyr Bloom LED Lights are two levels, High and Low.
- From off, press one time for High. LCD will show the words “
lights hi
” for 2 seconds then fade away.
- Press again for Low. LCD will display the words “
lights lo
” for 2 seconds then fade away.
- Press again to power lights off.
LCD Screen
- Displays status information, see Page 16 for more information.
clean mesh filter
clean air
®
" @
+0