BLOWING FUNCTION
Perform the same procedure previouslyillustrated for assembly in ash vacuum mode, for the following points:
1.
Remove the appliance from the packaging
2.
Loosen the clipsto release the head of the unit
3.
Remove the cover head
4.
Place the filter in the container
5.
Place the cover head on the metal drum making surethat the On / Off buttonisaligned with the air inlethole of the
metal drum, and fix the clips.
Now:
6.
Insert the flexible tube into the air outlet located on the cover head ,Insert the side with the shortestplasticring
than turn anti-clockwise. To release the tube rotate in the opposite direction.
7.
Nowinsert the aluminumtubeinto the other end of the flexible tube asshownpreviously
8.
Nowconnect the plug to an electrical outlet, turn on the unit or turn it off by pressing the On-Off buttonlocated on
the head of the appliance.
ATTENTION: DO NOT BLOW INCANDESCENT MATERIAL
