20
A. The focusing screen can be exchanged, depending on the type of
photographic work being undertaken. First, remove the finder
attached to the main camera body. Next, move the screen removal
levers on both sides in the arrow-indicated directions, as illustrated.
Then, using a pair of pincers or a similar tool, lift up the screen with
the protrusion at the rear end.
B. To install the focusing screen, insert the protrusion at the rear end
of the screen in a corresponding groove on the main camera body.
Then slide both screen removal levers forward to secure the focusing
screen.
* Seven types of focusing screens are available for the Bronica SQ-B.
The film winding crank can be detached by pulling out the crank
shaft as illustrated. The Speed Grip S may be attached in its place. For
use, see instructions supplied with the Speed Grip S.
* The Motor Drive SQ-I can not be attached to the Bronica SQ-B.
A. First, insert the U-shaped ring into the neck strap eyelet, as illus-
trated.
B. Next, place the plastic buckle over the U-shaped ring. Then, thread
the neck strap through the plastic buckle (and the U-shaped ring) and
pull it out, as shown by red arrows.
24. Interchanging Focusing Screens
25. Removal / Attachment of the Film Winding Crank
26. Attachment of the Neck Strap
