14
Operating Instructions
When using this device, wear suitable clothing and work gloves. The risk of injury can be
reduced by wearing a protective device and ensuring that the device is functioning
properly.
Make sure the device is functioning properly before each use. The start/off switch and
safety switch must be in working use. If the switch is loose, the power must be turned
off. If the switch is damaged, stop using the device.
Ensure that the voltage of the power supply is consistent with the voltage on the device
nameplate.
Make sure the scissors work properly to ensure that the electric scissors work in an
optimal state.
When the device is turned off, the blade will continue to run for some time. Wait for the
blade to stop. Do not touch or block moving blades. Otherwise, it will cause danger!
1) The battery is placed in the direction of the backpack, depending on the user's
preference for the left or right hand, the connector output is in the direction of holding the
pruning shear. Adjust the backpack position and fasten the belt.
2) Tighten the cables that connect the battery to the pruning shears.
3) Turn on the power switch, and after hearing the prompt tone, pull the trigger twice
continuously within 1 second. After hearing the prompt tone again, the pruning shear is
in a working state, and the trigger can be started. If the pruner stops abruptly during use,
check whether the nuts on both ends of the cable connecting the scissors and the
battery are tight. If there is looseness, tighten the power switch and turn it on again. If
the pruners stop working during long term use and you hear 4 fast beeps, this is an
indication of undervoltage protection which means the battery is depleted. Please charge
as soon as possible.
4) When using the scissors to stop moving, please check the pruner connection and battery
cable at both ends of the nut are tightened. If there is loosening phenomenon in time to
tighten and then turn the power switch back on again can be.
5) When used for a long time, if the pruner motion stops and you hear 4 quick beeps, this
indicates undervoltage protection and that the battery has been depleted, please charge
as soon as possible.
6) In order to conserve the use of battery power and ensure that the pruning shears have
the longest service life, do not overload the device and prohibit it from being used for
cutting more than 1-inch wet branches and .6-inch dry branches.
7) During the shearing process, if the shearing knife encounters a branch that cannot be
cut off, then release the trigger to be reset to the opening position, after which the next
normal shear session can be carried out.
