15
The blades of the pruner should not be moved around during while cutting, so as not
to damage the blades. Never move the pruner side to side when wedged.
Trimming Tips
•
When the device is running, please keep your other hand at least 6-inces away from the
cutting area of the blade, and the hand should not be placed in the blade.
•
Cannot use this device to forcibly cut larger branches, otherwise it may deform the
blade, causing the pruning shears to get stuck. Do not tilt and move when trimming
branches.
•
If the user does not follow the instructions, it may pose a danger. In cold or wet weather,
in order to protect the battery pack, please place it under waterproof clothing, please do
not use this device on rainy days.
•
We recommend that after daily use, you must cut off the connection between the pruning
shears and the battery pack, turn off the power switch, and put them together in the
companion tool box.
•
If the user feels that there is not enough power, or if the cut is not smooth enough, check
to see if the charge is depleted or if the blade is dull.
•
Cleaning and maintenance of repair work functions not mentioned in this manual shall
be carried out by the service center.
•
To ensure safe use, only original parts can be used. Please turn off the device before
you begin the overhaul.
•
Please cut off the connection between the battery and the device and store the battery in
a safe package. Wear gloves when touching a safety blade. This prevents sharp blades
from scratching the user. Subsequent cleanup and overhauls must be carried out on a
regular basis. This ensures the long-term reliable operation of the equipment.
Cleaning and Maintenance
Cleaning
When cleaning your ePruner do not spray the pruner with water or immerse it in water.
•
Do not spray the equipment with water or immerse it in water, otherwise it may cause
electric shock.
•
Keep inside of the handle including motor, transmission and worm drive clean.
•
Clean with a damp cloth or brush.
•
Do not use detergents or harsh solvents.
•
Please clean and sharpen the blade after each use.
•
After 8 hours of continuous operation, please disassemble the cover of the tool to clean
away any dirty grease and apply clean grease.
