17
8) In order to ensure the service life of the equipment and to prevent its degradation, it
must be stored with enough battery power.
9) When not in use, charge the battery at least once a month.
10) Do not turn on the power switch while storing.
Checking the Battery Charge Level
To determine your ePruner battery charge level your ePruner is supplied with a simple to read
LED readout which features 3 green and 1 red light. To illuminate the readout, hold the button
down on left of the LED readout. The readout is located on the top side of the battery pack by
the main power switch.
When all 3 green lights are illuminated then your battery is at or near full capacity. Depending
on operating variables such as diameter of cut, density of wood and frequency of the cuts a
typical battery charge will last 7-9 hours.
Reading LED Charge Indicator Levels
Li-Battery
LED indication
Battery capacity
Three squares green
80%-100%
Two squares green
50%-80%
One squares green
30%-50%
One squares red
Below 30%
Lithium Battery
LED indication
Voltage
Green
34
＜
Vcc
≤
42
Red
Vcc
≤
34
Charger
LED indication
Situation
Red
Charging
Green
Charging finish
When the red light is illuminated then you should charge the battery as soon as
possible.
