ZENONE FVC Series, Руководство пользователя

Страница: 37 / 38

MUGL
Page 37 of 38
rev. 18 November 2009
Reading the actual secondary value
Command Reply
0x14 “S” FA 0x14 “S” UMIS Actual value
FA Necessary in the three-phases devices.
Select the phase to read (“1”,”2”,”3”), if omitted it
means “1”
UMIS
“0”
Milliampere
“1” Ampere
Reading the remote connection state
Command Reply
0x14 "L" 0x14 "L" Connection state
Connection state:
“L” Not ACTIVE
“R” Active
Test Start and Stop commands
Enables remote mode
Command Reply
0x15 "M" Mode 0x15 "M" ESI
Remote mode:
“L” Not active
“R” Active
In “Remote” mode the output values are defined via SERIAL link. The start can be given
from SERIAL link or from PANEL/EXTERNAL according to the appropriate command
(0x11 “M”).