![background image](http://html1.mh-extra.com/html/zenoah/gz4350/gz4350_workshop-manual_3484192054.webp)
53
- English
Cleaning and inspection
NOTE!
If the bearings are fitted to the crankcase,
take care to prevent any dirt and foreign
particles from entering.
Clean all parts and scrape off all gasket remains
from the contact surfaces on the crankcase halves.
Check the following:
1. That the big-end bearing does not have any
radial play. Axial play is permitted. See figures
69.
2. That the big-end bearing does not have any
score marks or is discoloured on the sides.
3. That the bearing surface for the gudgeon pin
bearing does not have any score marks or is
discoloured. See figure 70.
4. That the crankshaft bearing has no play or
knocks.
5. That the sealing surfaces of the sealing rings
fitted against the crankshaft are not worn, and
that the rubber is not hard.
6. That the crankcase is not cracked.
7. Also inspect the bearing grip in the crankcase
half.
Repair Instructions
Fig 69
Fig 70
Содержание GZ4350
