background image

GB-4

EX2600

2. Specification

Engine

Type .............................................................................Air-cooled 2-stroke gasoline
Model ..............................................................................................  Zenoah G26LS
Displacement ............................................................................................  25.4 cm

3

Max. output .................................................. 1.1 HP (0.81 kW) at 7500/min-1 (rpm)
Idle speed ........................................................................... 3000 ±200/min-1 (rpm)
Fuel ....................................................................................... GASOLINE 25 : OIL 1
 

When using market oil (JASO FB grade oil or ISO-L-EGB grade oil)

 

GASOLINE 50 : OIL 1

 

When using ZENOAH genuine oil, JASO FD grade oil or ISO-L-EGD grade oil

Carburetor .........................................................................  Walbro Diaphragm type
Spark plug ........................................................................................ NGK BPMR7A

Fuel tank capacity ............................................................................................... 0.75 L

BC-EX3

Overall size (L 

3

 W 

3

 H) .......................................................... 1845 

3

 333 

3

 322 mm

Dry weight w/o acc. ............................................................................................  6.0 kg
Transmission ................................... Centrifugal clutch, rigid power transmission shaft
Reduction ratio ....................................................................................................  1.462
Cutting head rotating direction .............................. Counter-clockwise (Operator view)

LRT-EX

Overall size (L 

3

 W 

3

 H) .........................................................  2300 

3

 330 

3

 258 mm

Dry weight w/o acc. ............................................................................................  6.4 kg
Transmission ................................... Centrifugal clutch, rigid power transmission shaft
Reduction ratio ........................................................................................................  4.0
Cutting attachment

Type ............................................................................ Reciprocating Double blade
Tooth ........................................................................................................... 28 teeth
Pitch .............................................................................................................. 30 mm
Effective cutting length .................................................................................  40 cm
Angle adjust range ....... 90° (±45° from cutting attachment position aligned shaft)

PS-EX2

Overall size (L 

3

 W 

3

 H) .......................................................... 2065 

3

 228 

3

 258 mm

Dry weight w/o bar and chain ...........................................................................   5.4 kg
Transmission ................................... Centrifugal clutch, rigid power transmission shaft
Reduction ratio ......................................................................................................  0.94
Cutting attachment

Guide bar: 

Type ................................................ OREGON DOUBLE GUARD

 Size ................................................................................. 250 mm
Saw chain: 

Type ...................................................................  OREGON 25AP

 pitch 

3

 gauge ...................................................... 1/4 

3

 0.050 in

Sprocket ..............................................................................................................  8T
Oil pump .............................................................................................  Plunger type

 01-EX2600_GB_cs5_二.indd   4

17/04/14   18:09

Содержание EX2600































Отзывы: