18
3. You can avoid thrown debris by sweeping from
your left to the right.
4. Use a slow, deliberate action to cut heavy
growth. The rate of cutting motion will depend on
the material being cut. Heavy growth will require
slower action than will light growth.
5. Never swing the unit so hard as you are in
danger of losing your balance or control of the
unit.
6. Try to control the cutting motion with the hip
rather than placing the full workload on the arm
and hands.
7. Take precautions to avoid wire, grass and dead,
dry, long-stem weeds from wrapping around the
head shaft. Such materials can stall the head
and cause the clutch to slip, resulting in damage
to the clutch system if repeated frequently.
ADJUSTING THE LINE LENGTH
• Your brushcutters is equipped with a semi- auto
type nylon line head that allows the operator to
advance the line without stopping the engine.
When the line becomes short, lightly tap the
head on the ground while running the engine at
full throttle.
• Each time the head is bumped, the line advance
about 1 inch(25.4 mm). For better effect, tap the
head on bear ground or hard soil. Avoid
bumping in thick, tall grass as the engine may
stall by overload.
8. Operation
Содержание BT225
Страница 20: ...20 9 Maintenance 8 11 14 1 2 9 10 12 13 15 THIS SIDE UP THIS SIDE UP WIND LINE...
Страница 26: ...12 Parts list 26 Fig 1 DRIVE UNIT BT225 S N 000001 and up...
Страница 28: ...Fig 2 ENGINE UNIT BT225 S N 50100000 and up 28 12 Parts list...
Страница 32: ...Printed in Japan KOMATSU ZENOAH AMERICA INC 4344 Shackleford Road Suite 500 Norcross Georgia 30093...