Square TMD
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
19
2.3
BUTTONS
As indicated in previous sections, Square TMD features
one, two, four or six
capacitive buttons
(depending on the model) at the user’s disposal for the execution
of actions. Each will perform a specific function any time, as their functions do not
depend on alternating menus, pages, etc.
The distribution of the buttons will depend on the model, being possible to configure
them as single-button controls or in pairs by
combining any two of them
within one
pair.
There are some differences in the button configuration depending on the model:
Square TMD 1
: due to the existence of only one push button, only one
individual control is possible (two-button controls are not available).
Moreover, it can only be configured under the normal (vertical) orientation
(see section 2.2.1).
Figure 15
Square TMD 1.
Square TMD 2
: up to two one-button controls can be configured, or either
one two-button control, under any of the two orientations (see section 2.2.1).
Figure 16
Square TMD 2. Orientación normal (izquierda) y rotada (derecha).
Square TMD 4
up to four one-button controls can be configured, or up to two
two-button controls (by combining any two buttons for each pair). The figure
shows which number identifies each button during the configuration process.
