Z41 Pro / Lite / COM
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
60
user will be required to type the corresponding old password (level 1 or level 2).
Note that although it will be possible to type password 2 even if the device asks
for password 1, the new password typed afterwards will be anyway stored as the
new password for level 1
.
Security Pad Labels
: parameter consisting in six additional textboxes, intended
for the customisation of the messages that the device shows (or may show) when
the user interacts with the password insertion dialog. Up to 15 characters are
permitted per label.
➢
Label for
“Password 1”
: message shown when the user is required to type
in the password for level 1. By default,
“Password 1”.
➢
Label for
“Password 2”
: message shown when the user is required to type
in the password for level 2. By default,
“Password 2”.
➢
Label for
“Error”
: message shown to the user when the typed password is
not valid. By default,
“ERROR”.
➢
Label for
“New password”
: message shown to ask the user for a new
password, during the password change process. By default,
“New
password
”.
➢
Label for
“Repeat password”
: message shown when the user is required
to re-type the new password. By default,
“Repeat password”.
➢
Label for
“Updated”
: message shown to the user as a confirmation of the
password change. By default,
“Updated”.
Buttons that lead to a protected page or box will show a little
lock
icon overlaid on their
lower left corner.
