Touch-MyDesign
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
33
Being the main button panel organised into pairs (A, B, C and D, in the case
of Touch-MyDesign 8), the main buttons are referred to as A1, A2, B1, B2,
etc. In the case of the additional button panel, the 5 buttons constitute a sole
block (“Z”), because of which the additional individual touch buttons will be
referred to as Z1, Z2, Z3, Z4 and Z5.
As a consequence of the above, the name of any object related to an
additional button working individually will always begin with “[Zi]”, where “i” is
the number of the corresponding button (1-5). Section 3.3.2 refers to object
names beginning with “[Xi]”.
3.4.6
INDIVIDUAL INDICATORS
This option permits turning the additional button panel non-functional (thus performing
no actions on button touches) while the corresponding LEDs still work as individual
indicators, whose light states permanently depend on the value of the “[Zi] LED On/Off”
binary objects, displayed for that purpose.
Figure 20
Individual Indicators (Additional Buttons)
One parameter named “ON Value” will be shown for each of the five LEDs, making it
possible to associate a certain logic state (“0” ó “1”) to each light state of the LEDs (on
and off). The options available for this parameter are:
0=Off; 1=On
: the LED will switch to the “on” state (default or customised; see
“LED Lighting” in Section 3.2) when the “[Zi] LED On/Off” object receives the
value “1”, and will switch to the “off” state when it receives the value “0”.
