Touch-MyDesign
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
32
Figure 18
1-byte Control: Scaling (Additional Buttons)
This type of functionality will always entail a “state-dependent” behaviour in the LEDs:
as soon as the “[Z] 1-byte value (scaling)” object receives a value that equals one of
the parameterised values for the additional buttons, the LED corresponding to the
matching button will turn on, while the other LEDs will turn off.
3.4.5
INDIVIDUAL BUTTONS
This option permits using the additional buttons (all or some of them) as individual
touch buttons (referred to as Z1, Z2, Z3, Z4 and Z5), i.e., as touch buttons with
independent functionalities, separately configurable. This brings the possibility of
making use of up to 5 more individual buttons apart from those from the main button
panel, or even destining the latter for pair button controls while the required individual
controls can be implemented by the additional button panel.
Figure 19
Button Z1 (Additional Buttons)
Therefore, the parameterisation and the functionalities available for these additional
buttons working as individual controls are completely analogous to those already
described for the main buttons working as individual controls. Please refer to section
3.3.2 (omitting, if desired, the two initial paragraphs prior to
Figure 14
) for further
information. Please note that the following remarks apply:
