TMD-Display View
TMD-Display View
http://www.zennio.com
Technical Support:
http://support.zennio.com
57
The “
state-dependent
” LED illumination mode is not available for this
function.
Timer
: this function allows sending a binary value ("1" or "0") or a scene
command to the KNX bus at a certain time, either as a single sending (one-
time execution), as a periodic sending or after a countdown time.
LED indicator
: user presses will not trigger any function although the LED
will turn on or off depending on the values received from the bus.
ETS PARAMETERISATION
When an individual button has been enabled, a specific tab (“
Button Xn
”) becomes
available under “Buttons” in the tree on the left.
Figure 39
Individual Button.
Parameters common to all types of controls are:
Function
: sets the desired function for the button:
“Switch”, “Two Objects
(short press / long press)
”, “Hold & Release”, “Scene”, “Counter constant”,
“Scaling constant”, “Float constant”, “Enumeration”, “Dimmer”, “Shutter”,
“Timer” or “LED Indicator”.
Label
: text (up to 10 characters) to be displayed to identify the control.
Icon
: icon to be displayed over each button in the display. For a list of the
available icons, please refer to ANNEX II. Button Icons.
Depending on the function, some more parameters are involved (as described next).
Please n
ote that in the next pages “
[Pn] [Xj]
” is used as a general notation for the