Zennio TMD, Руководство пользователя, Страница: 38 / 88

TMD-Display View TMD-Display View
http://www.zennio.com Technical Support: http://support.zennio.com
38
Text for ‘0’
and
Text for ‘1’
: sets the text to be displayed between the icons
of the buttons when the values ‘0’ and ‘1’ are sent (respectively) after short-
pressing them.
Action on long press
: sets the value that will be sent through “
[Pn] [X] Two
switches: Long press
” after the user long-presses one of the two buttons.
 “Left=0; Right=1”.
 “Left=1; Right=0”.
Note : this
parameter will remain hidden unless having selected “Every button
pair is configured separately
” in
Action of the pair buttons (see section
2.3.1).
Long press threshold time : sets the minimum time the user should hold the
button in order to consider it a long press. The available range is 5 to 50
tenths of a second, being 6 tenths the default value.
LED illumination control : analogous to the homonymous parameter for the
Switch function (see above). In this case, however, selecting “State-
dependent
” or “State-dependent (both LEDs)” brings an additional parameter,
“
State Object
”, to make the state of the LEDs correspond either to object
“
[Pn] [X] Two switches: Short press
” (“Short Press Object”) or to object
“
[Pn] [X] Two switches: Long press
” (“Long Press Object”).
Figure 24 Pair Buttons - Two objects (short press / long press) - LED illumination control.