TMD-Display View
TMD-Display View
http://www.zennio.com
Technical Support:
http://support.zennio.com
34
Indicator
: in this case, the two push buttons are functionless, although the
display will show the value of an indicator (with a configurable type and size)
on the right size.
ETS PARAMETERISATION
When a button pair has been configured to work as a joint control, a specific tab (“
Pair
X
”) becomes available under “Buttons” in the tree on the left.
Figure 19
Buttons - Pair A.
Parameters common to all types of controls are:
Function
: sets the desired function for the button pair: “Switch”, “Switch +
Indicator
”, “Two objects (short press / long press)”, “Counter”, “Scaling”,
“Float”, “Enumeration”, “Shutter”, “Dimmer”, “[Climate] Temperature Setpoint”,
“[Climate] Mode” or “[Climate] Fan”, “Multimedia” or “Indicator”.
Label
: textbox to enter a string (up to 10 characters) which is displayed on
the screen between the icons of the buttons, in order to identify the control.
Icon
: allows selecting the icon that is drawn on each button on the display.
Please refer to ANNEX II. Button Icons for a list of available icons.
Depending on the function, some more parameters are shown, as described next.
Please note that in the next pages the general notation “
[Pn] [X]
” is used for the name
of the communication objects, as “X” depends on the button pair (A, B, etc.). On the
other hand,
“Pn” will refer to the page number.