background image

 

 

Zennio Linecoupler 

http://www.zennio.com

 

 

Technical Support:

 

http://zennioenglish.zendesk.com

   

 

11 

2.1.2

 

ZENNIO LINECOUPLER AS A REPEATER 

Figure 2 also includes a particular case where a repeater (marked as “LR”) is required: 
two separate sub-line  segments  (one of which  with no other connection to the 
installation, in order to prevent  forbidden situations such as in  Figure  7),  both 
containing devices,  need to be linked for extending the sub-line. Linecoupler offers 
such linking interface, with proper electrical insulation for the connections. 

 

Figure 7 

Forbidden Situation: Segment with Two Connections to the Bus

 

Line repeaters do not implement filter tables

. As the name suggests, any telegram 

on one of the buses will be repeated to the other bus. It is therefore irrelevant whether 
the telegram originates on one side or another and whether it is destined to one side or 
another: both segments melt together. Therefore, the Linerepeater application program 
will only let transmitting  or dropping  every  telegram destined to physical addresses, 
while no drop or filter options are provided for those destined to group addresses. 

Note

while the individual address of a line coupler does, the individual address of a 

repeater does not have particular restrictions, apart from belonging to the address 
range of the corresponding sub-line

In the case of the line repeater application program, the LED lights on the top of the 
device follow the pattern already described for the line coupler application program 
(see section 2.1.1), although the GA status LED will always show in orange (no option 
for group address blocking or filtering is available in the line repeater), while the PA 
status LED will never turn green (no option for individual address filtering is available in 
the line repeater). 

3.0.0 

3.3.0 

3.3.42 

3.3.43 

3.3.44 

3.3.45 3.3.46 

3.3.47 

3.3.49 

3.3.48 

3.3.41 

Содержание Linecoupler ZN1SY-LCTP























Отзывы: