Zennio Linecoupler
Technical Support:
http://zennioenglish.zendesk.com
10
Mainline Status LED
: shows the status of the primary bus.
o
OFF = error: mainline not connected or not powered
o
ON (green) = OK.
o
ON (orange) = manual function in execution.
Sub-line Bus Status LED
: shows the status of the secondary bus.
o
OFF = error or secondary line not connected.
o
ON (green) = OK
Mainline Traffic LED
: shows the traffic status in the primary bus.
o
BLINKING (green) = traffic.
o
OFF = no traffic.
o
BLINKING (red) = errors in the transmissions.
Sub-line Traffic LED
: shows the traffic status in the secondary bus.
o
BLINKING (green) = traffic.
o
OFF = no traffic.
o
BLINKING (red) = errors in the transmissions.
Group Address (GA) Filter Status LED
: shows the current configuration of
the group address routing:
o
OFF = different routing for the main and the secondary lines.
o
ON (green) = filtering active.
o
ON (orange) = all group addresses routed.
o
ON (red) = routing blocked.
Physical Address (PA) Filter Status LED
: shows the current configuration
of the individual address routing:
o
OFF = different routing for the main and the secondary lines.
o
ON (green) = filtering active.
o
ON (yellow-orange) = all individual addresses routed.
o
ON (dark orange) = routing blocked.
Note
:
please
be careful not to confuse yellow-orange and dark orange.
Please refer to section 3 for a detailed explanation of the different behaviours and
parameterisations of the line coupler application program.
