KLIC-DD3
http://www.zennio.com
Technical Support:
http://support.zennio.com
11
2.4
AC GATEWAY
2.4.1
CONFIGURATION
KLIC-DD3 allows controlling and monitoring an air-conditioning unit in the same way it
would be through the wired remote control it is provided with.
Through the KNX bus, KLIC-DD3 can be sent orders to control the following basic
functions of the air conditioning unit:
On/Off
switch of the air-conditioning unit.
Operation mode
: automatic, heating, cooling, fan and dry.
Temperature setpoint
, which
can be modified
within a specific range of
values, depending on the capabilities of the specific A/C unit being controlled.
Fan speed
: 5 levels and automatic mode.
Flaps swing
:
vertical flaps, horizontal flaps or both types depending on A/C
unit.
Moreover, KLIC-DD3 allows configuring several advanced functions:
Initial configuration
, which allows establishing the desired initial parameters
for the state of the A/C unit after programming or restarting the device.
Setpoint limits
,
to restrict the range for the temperature setpoint.
Automatic off
, which allows an automatic and temporary switch-off of the
unit (after a pre-established delay, if desired) when the communication object
associated to this function is triggered due to a certain event.
Scenes
, which
allows defining specific climate control presets, to be sent to
the machine on the reception of scene orders from the KNX bus.
These functionalities imply changes in the state of the A/C unit, which therefore notifies
KLIC-DD3 periodically about the current state. When KLIC-DD3 is notified about a
change, it updates the
status objects
and sends them to the KNX bus. In addition,
