KLIC-DD3
http://www.zennio.com
Technical Support:
http://support.zennio.com
12
KLIC-DD3 provides an
error management
function (see section 2.4.4), which allows
sending messages to the KNX bus in case the A/Cunit reports any errors.
ETS PARAMETRIZATION
The Configuration window under AC Gateway provides the following parameters:
Figure 6.
AC Gateway. Configuration.
OPERATION MODES
KLIC-DD3 allows controlling the A/C unit operating mode through the following objects,
available by default:
“[AC] Mode”
: 1-Byte object which allows selecting the A/C unit operation
mode. There will be only taken in account values that are appropriated with
some of available modes in Daikin units, which are represented in Table 1.
