Zennio KIPI SC, Руководство пользователя

Страница: 13 / 16

KIPI SC v1.1
https://www.zennio.com Technical Support: https://support.zennio.com
13
2.2 GENERAL
The only parameterizable screen available is “General”. All device functions can be
activate/deactivate from this screen.
ETS PARAMETERISATION
Figure 8. General.
Heartbeat (Periodic Alive Notification) [ disabled /enabled ]: incorporates a
one-
bit object to the project (“ [Heartbeat] Object to Send ‘1’ ”) that will be sent
periodically with value “1” to notify that the device
is still working ( still alive ).
Figure 9. Heartbeat
Note: the first sending after download or bus failure takes place with a delay of
up to 255 seconds, to prevent bus overload. The following sendings march the
period set.
Synchronize Clock Master via NTP [ disabled /enabled ]: enables or disables
the “NTP” tab in the tree on the left. For more information, see section
2.3.
Note: This parameter must be enabled in the device that will be clock master
so that there is only one in the installation.
DNS Servers Configuration: numeric text fields to enter the IP address of two
DNS servers:
➢
IP Address of DNS Server 1 and 2 [ 198.162.1 , 198.162.2 ].