KIPI SC v1.1
Technical Support:
12
2.1.2
ADDICIONAL INDIVIDUAL ADDRESSES (TUNNELING ADDRESSES)
KIPI SC requires a specific individual address when acting as a programming interface
(
tunneling
) other than the address of the device itself. Up to five simultaneous
connections are possible, which implies that up to five different individual addresses must
be configured.
Although, by default, the physical address of KIPI SC is
15.15.255
and tunneling
addresses are
15.15.250
,
15.15.251
,
15.15.252
,
15.15.253
and
15.15.254
, all of them
can be configured in ETS after adding the device to the project, as shown in Figure 7:
Figure 7.
Set tunneling addresses.
After the individual KIPI SC address has been set, the five tunneling addresses are
automatically set with consecutive values. This can be changer at any time.
Important:
KIPI SC tunnelling addresses must not match any of the addresses set to
other devices on the system.
