inBOX 24 v2 / inBOX 20 v2
Technical Support:
8
2.2
INPUTS (ONLY inBOX 24 v2)
inBOX 24 v2 incorporates
four analogue/digital inputs
, each configurable as a:
Binary Input
, for the connection of a pushbutton or a switch/sensor.
Temperature Probe
, to connect a temperature sensor from Zennio or NTC
probes from third parties (the latter requires configuring their parameters in
ETS).
Motion Detector
, for the connection of a motion detector from Zennio.
Important: older models of the Zennio motion detector (e.g., ZN1IO-DETEC
and ZN1IO-DETEC-N) will not work properly with inBOX 24 v2.
ETS PARAMETERISATION
When
Inputs
has been activated in the General parameters screen, the following drop-
lists will be available for the selection of the specific functions required.
Figure 5.
Inputs - Configuration
All inputs are disabled by default. Depending on the function selected for each input,
additional tabs will be included in the menu on the left.
2.2.1
BINARY INPUT
Please refer to the specific user manual “
Binary Inputs
”, available in the inBOX 24 v2
¡product section, at the Zennio website (