Zennio Flat Sensato v2, Руководство пользователя

Страница: 11 / 20

Flat Sensato v2
https://www.zennio.com Technical Support: https://support.zennio.com
11
2.4 NOTIFICATION LED
2.4.1 CONFIGURATION
Flat Sensato v2 has a LED to notify, through colours, the ranges of the current humidity
values. The colour to notify the humidity ranges can be two (green and yellow) or three
(green, yellow and red).
It is possible to modify by parameter the humitidy thresholds of the range
corresponding to each colour. The following figure shows an example with the default
threshold values:
Figure 5 . Default colors of Notification LED.
In addition, LED notification can be activated or deactivated via a binary object that is
always available, even if the functionality is not enabled after programming. In this
case, the colours and humidity thresholds to be set will be the default ones.
ETS PARAMETERISATION
After enabling Notification LED (see section 2.1), a new tab will be incorporated into
the tree on the left.
0
20
40
60
80
100
Hu
midi
ty
%
Green and Yellow
0
20
40
60
80
100
Green, Yellow and Red