Zennio Flat Sensato v2, Руководство пользователя

Страница: 5 / 20

Flat Sensato v2
https://www.zennio.com Technical Support: https://support.zennio.com
5
2 CONFIGURATION
After importing the corresponding database in ETS and adding the device into the
topology of the desired project, the configuration process begins by entering the
Parameters tab of the device.
2.1 GENERAL
From the “General” tab enabling additional functions available for the device is possible.
ETS PARAMETERISATION
Figure 2 General settings.
Notification LED [ disabled /enabled ]
1
:
enables or disables the “Notification
LED” tab in the tree on the left, depending on whether this functionality is
required or not. See section 2.4 for details.
Inputs [ disabled /enabled ] :
enables or disables the “Inputs” tab in the tree on
the left, depending on whether the device will or will not be connected any
external accessories. See section 2.5 for details.
Logic Functions [ disabled /enabled ] :
enables or disables the “Logic
Functions” tab in the tree on the left, depending on whether this functionality
is required or not. See section 2.6 for details.
Heartbeat (Periodical Alive Notification) [ disabled /enabled ] : this parameter
lets the integrator incorporate one-bit object to the project
1
The default values of each parameter will be highlighted in blue in this document, as follows:
[ default /rest of options ].