Pg 5 of 32
www.zennahome.com IS072D2-I
• With the arrows on the mounting bracket for the 7/8 in. diameter tube (C) pointing
UP and DOWN
, fasten the
7/8 in. diameter tube assemblies (C) to the mounting bracket for the 7/8 in. diameter tube (B) using the
mounting bracket screw (2) and threaded insert (3).
NOTE:
The flat side of the 7/8 in. diameter tube assembly (C)
should be facing
DOWN
.
• Tighten the mounting bracket screw (2) and threaded insert (3) using the large allen wrenches (5).
•
Repeat this step for the 1 in. diameter tubes (D).
Step 1 - Attaching the Mounting Brackets.
3
2
REAR
tube assembly (C)
FRONT
tube assembly (C)
B
C
C
Permanent Installation - For Tension Mount Installation go to page (12)
