Safety Instructions
1-1
206-3612 ZENITH PRO1200X 151199
SAFETY WARNINGS:
SAFETY WARNINGS:
SAFETY WARNINGS:
SAFETY WARNINGS:
SAFETY WARNINGS:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
TO PREVENT FIRE OR SHOCK HAZARDS. DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
Before operating this equipment please read this manual
Before operating this equipment please read this manual
Before operating this equipment please read this manual
Before operating this equipment please read this manual
Before operating this equipment please read this manual
thoroughly, and retain it for future reference.
thoroughly, and retain it for future reference.
thoroughly, and retain it for future reference.
thoroughly, and retain it for future reference.
thoroughly, and retain it for future reference.
All the safety and operating instructions should be read before using
this unit.
The safety and operating instructions manual should be retained for
future reference.
All warnings on the equipment and in the documentation manuals
should be adhered to.
All instructions for operating and use of this equipmentmust be
followed precisely.
Installation and preliminary adjustments should be performed
Installation and preliminary adjustments should be performed
Installation and preliminary adjustments should be performed
Installation and preliminary adjustments should be performed
Installation and preliminary adjustments should be performed
by qualified ZENITH personnel or by authorized ZENITH service
by qualified ZENITH personnel or by authorized ZENITH service
by qualified ZENITH personnel or by authorized ZENITH service
by qualified ZENITH personnel or by authorized ZENITH service
by qualified ZENITH personnel or by authorized ZENITH service
dealers.
dealers.
dealers.
dealers.
dealers.
FEDERAL COMMUNICATION COMMISSION (FCC) STATEMENT
FEDERAL COMMUNICATION COMMISSION (FCC) STATEMENT
FEDERAL COMMUNICATION COMMISSION (FCC) STATEMENT
FEDERAL COMMUNICATION COMMISSION (FCC) STATEMENT
FEDERAL COMMUNICATION COMMISSION (FCC) STATEMENT
Note:
Note:
Note:
Note:
Note: This equipment has been tested and found to comply with the
limits of a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the seperation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician.
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION: Do not attempt to modifiy this product in any way
without written authorization from Zenith Electronics Corporation.
Unauthorized modification could void the user's authority to
operate this product.
Note :
The use of shielded cables is required to comply within the limits of
Part 15 of FCC rules.
1
1
1
1
1
SAFETY INSTR
SAFETY INSTR
SAFETY INSTR
SAFETY INSTR
SAFETY INSTRUCTIONS AND
UCTIONS AND
UCTIONS AND
UCTIONS AND
UCTIONS AND W
W
W
W
WARNINGS
ARNINGS
ARNINGS
ARNINGS
ARNINGS
Notice on Safety
Notice on Safety
Notice on Safety
Notice on Safety
Notice on Safety
This equipment is built in accordance with the requirements of the
international safety standards UL 1950 and CSA C22.2 No.950,
which are the safety standards of information technology equipment
including electrical business equipment.
These safety standards impose important requirements on the use
of safety critical components, materials and isolation, in order to
protect the user or operator against risk of electric shock and energy
hazard, and having access to live parts.
Safety standards also impose limits to the internal and external
temperature rises, radiation levels, mechanical stability and strength,
enclosure construction and protection against the risk of fire.
Simulated single fault condition testing ensures the safety of the
equipment to the user even when the equipment's normal operation
fails.
SAFETY SYMBOLS
SAFETY SYMBOLS
SAFETY SYMBOLS
SAFETY SYMBOLS
SAFETY SYMBOLS
The lightning flash with an arrowhead within a
triangle is intended to tell the user that parts inside
this product may cause a risk of electrical shock
to persons.
The exclamation point within a triangle is in-
tended to tell the user that important operating
and/or servicing instructions are included in the
technical documentation for this equipment.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
W AR NING
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
Содержание PRO1200X
Страница 1: ...PRO1200X OWNER S MANUAL ...
Страница 14: ...Connections 3 6 206 3612 ZENITH PRO 1200X 151199 ...