Zenith IQB56W10G, Руководство по эксплуатации

Страница: 33 / 72

GUIDE Plus+ System Connection
P A G E 3 3 206-3583
Locate the jack marked G-Link.
This jack is for the IR
Cord connection. Insert the
connector into the G-Link.
Place the other end of the
cords with the IR (Infrared)
emitter sending units in
front of your VCR and Cable
Box in such a way as to
allow for an unrestricted
path for the IR signals to be
able to reach the front pan-
els of the VCR and Cable Box.
If necessary, peel off the
green protective strips from
the front and back of the IR
emitter to hold emitter in
proper location.
1
2
IR emitter
IR emitter
IR receiver
IR receiver
VCR G-LINK
Cable Box
17
In order to receive the GUIDE
Plus+ signal, it is necessary to
connect your TV through the
Antenna/Cable #1 jack on the rear
of the TV.