Zenith HydroTap G4 Celsius C125, Руководство по установке, Страница: 15 / 20

801525NZ - Chilled HydroTap Installation Instructions - Aug 2015 - v2.00 Page 15 of 20
The following instructions are critical if the vent kit, as supplied, is not fitted:
If the kick board vent kit cannot be used then it is important to fit a standard HydroTap vent kit, which ensures
heat dissipation through natural convection via installed vents. For high use applications, where the cupboard
space temperature is near 35°C, or higher, an auxillary ventilation kit must be fitted. (contact your local
service centre for availability).
Note: The vent kit has to be installed in a way that allows air to be drawn in from the bottom of the cupboard
and expelled through the top of the cupboard. Therefore placement of the outlet vent should be towards the
top of the door (Option 1) or on the side of the cupboard (Option 2).
A B
C
Min. 35mm
Side outlet vent
(Option 2)
Door outlet
louvre
(Option 1)
Front inlet vent
Cool Air IN
Warm Air OUT
Ventilation