Zenith Concierge H20E35DT, Инструкция по установке и эксплуатации, Гарантия

Страница: 44 / 52

P A G E 4 4
206-3749
Glossary
A list of definitions for some of the words found in this installation and operating guide
75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. The end looks like a hex-shaped nut with a
wire sticking through the middle. It screws onto the threaded jack on the back of the TV.
300 TO 75 OHM A small device that connects a two-wire
300 ohm
antenna to a 75 ohm RF jack.
ADAPTER They are usually about an inch long with two screws on one end and a round opening with a wire sticking out on
the other end.
A/V CABLES Audio/Video cables. Cables bunched together—right audio (red), left audio (white), and video (yellow).
A/V cables are used for stereo playback of videocassettes and for higher quality picture and sound from other
A/V devices.
A/V DEVICE Any device that produces video or sound (VCR, DVD, cable box, or television).
ADDED This function lets you add new channels to list that the guest will scroll through when using the guest remote.
AMPLIFIER An electronic device that amplifies sound from a television, CD player, VCR, DVD or other A/V device.
ANTENNA The physical receiver of television signals sent over the air. A large metal piece of equipment does not always have
to be visible for the lodge to be using an antenna.
AUTO PROGRAM Auto Program has the TV automatically find all the channels available in the lodge area.
CAMPORT Front video input jack that can receive a video signal from a camcorder, VCR or other A/V device.
DELETED Lets you remove channels from the list the guest will scroll through using the guest remote.
INPUT Refers to an input jack that can receive a signal from a TV, VCR, camcorder, or other A/V device.
JACK An input or output connection on the back of a TV, VCR, or any other A/V device.
MONO SOUND Mono (monaural) sound is one channel of sound. On more than one speaker, all the speakers play the same audio.
OUTPUT Refers to the jack that sends a signal out of a VCR, DVD, or other A/V device.
2ND AUDIO Second Audio Programming (SAP) is another, separate, audio channel
PROGRAMMING/SAP Available with some programming. Choosing SAP often refers to listening to audio in another language, such as
Spanish or French.
SIGNAL Picture and sound traveling through a cable, or over-the-air, to the television.
STEREO SOUND Stereo (Stereophonic) sound refers to audio that’s divided into right and left channels.
TUNER Device that picks up the video and audio signals and turns them into picture and sound.
XDS Extended Data Service: Additional program information provided at the discretion of the broadcaster.