P A G E 2 6
206-03890
PIP (Picture-In-Picture) Options
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the Setup menu.
Press the RIGHT arrow button to access
the Setup menu.
Use the UP/DOWN arrows to select the
Sub Input option.
Press the RIGHT arrow to access the Sub
Input menu, then use the UP/DOWN arrow
button to select the source. Your choices
are: DTV, Analog, Video 1, Video 2, Video
3, and Front Video.
Press EXIT button to return to TV viewing
or press MENU button to return to the
previous menu.
1
1
2
3
4
5
Changes the picture source for the Picture-In-Picture
screen so you can watch your off-air TV, cable TV, VCR,
or any other devices that are connected to your TV.
Press the PIP button to show the sub picture.
Each press of PIP button changes the PIP options as shown below.
PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large, and the other
source will show a smaller inset image.
Use the PIP INPUT button to select the
input source for the sub picture.
Each time you press PIP INPUT button,
you toggle between DTV, Analog, Video 1,
Video 2, Video 3, and Front Video.
Do not display a fixed image on the screen for long
periods of time.
Component 1-2 and DVI input sources are not avail-
able for PIP/Twin picture input source.
You can’t select DTV for main and sub picture simul-
taneously.
Using the menu
Using the PIP INPUT button
PIP mode
POP mode
PIP off
Twin Picture mode
Watching PIP
PIP Source Selection
